Logistics And Frieght Forwarding

Drum rolls with Dan-Czech

October 18 – Dan-Czech Specialtransport has handled the delivery of a 60-tonne dryer drum from its manufacturer’s site in Prerov, Czech Republic to Tiszap?sp?ki in Hungary. The cargo, which measured 49.5 m x 5.1 m x 5.25 m, was transported by road using a trailer combination of two Goldhofer THP/ET5 units and a 19 m long vessel bridge loading deck. Dan-Czech explained that the bridge is equipped with two hydraulic arms on each side, which allows the cargo to be lifted up to 1.5 m above the ground in order to overcome obstacles and sharp turns en route.

The company told HLPFI that route surveys and bridge engineering – including bridge assessments and static calculations – also had to be conducted in order to navigate the complex routing with its tight roundabouts and sharp turns. In addition, there were a number of power lines and cables that had to be lifted or temporarily removed during the transport operations. Dan-Czech stated that it worked closely with the power companies and railway authorities in order to complete the 570 km journey, which took a total of ten days to complete.

danczech-drum-dryer-2016-10-18-low.jpg

danczech-drum-dryer2-2016-10-18-low.jpg

www.dan-czech.cz[1]

www.goldhofer.de[2]

References

  1. ^ www.dan-czech.cz (www.heavyliftpfi.com)
  2. ^ www.goldhofer.de (www.heavyliftpfi.com)



Leave a Reply

Your email address will not be published. Required fields are marked *

*