FOXSUR 12V 24V 11-Stage LCD Display Battery Charger Waterproof Truck Car Motorcycle Lead-Acid EFB GEL WET AGM Batteries UK Plug

Description: 1. Microprocessor Control (CPU).
2. This is a fully automatic battery charger with 11 charge stages.

3. Output short-circuit protection.

4. Reverse connection protection.

5. Correct connect for the battery, and charger works well.
  Feature: 1.
Waterproof: Water Repellent for light rain. please don't   into the water, otherwise it will damage the charger.     2. Automatic charging protects your battery from being overcharged.

So you can leave the charger connected to the battery indefinitely.

3.11 -stage charging is a very comprehensive and accurate charging process that gives your battery longer life and better performance compared to using traditional chargers.

4.11 -stage chargers are suitable for most battery types including Calcium, EFB, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries.
  Specification: Charger for Battery Size12V for 24AH - 200AH24V for 12AH - 100AHSwitchmode technology  YesPolarity protection  YesOutput short protection  YesNon battery link protection  YesOver voltage protection  YesOver temperature protection  YesCooling   Natural convectionInput voltage  180-260V AC, 50-60HzRated output  12V DC 8A, 24V DC 4AMinimum start voltage  2.0VT he 11 stages are  Diagnosis, Boosting, Pre-Charge, Soft Start, CC1, CC2, CC3, CV, Testing, Desulphation, Restart. Thermal protect   65'C+/-5'CEfficiency  App.

85%. Compliant standards  CB, CE, IEC60335, EN61000, EN55014Dimension (LxWxH)  220x108x60mmWeight  710g AC cable length  1.5 mDC cable length  1.4 m11-Stage:   1.
  Diagnosis:   Check the battery status.

2.
Boosting:   Check the battery can save power.

3.
Pre-charge:   Use small current   to charging.

4.
Soft start:   The battery voltage will increase slowly.

5.
Constant current 1:     Use Max. Current to charging.

6.
Constant current 2:     Use 3/4 Current to charging.

7.
Constant current 3:     Use 1/2   Current to charging.

8.
Constant voltage:         *The battery can charge up to almost 90%.         *The charging current tapers and the charging voltage are kept   constant at the set value.

9.
Testing (2 minutes):         *The charging is interrupted for a short period while battery voltage is measured.         *If the battery voltage falls too quickly, the battery could be faulty. (if battery discharge quickly(don't can hold voltage), the charger will go to Desulphation-mode, otherwise
LCD display:   FUL)10.
Desulphation (2 Hrs):           *Charger will go into this stage if battery fails, Testing Mode due to its   condition, age or being under charged.           *This stage can recover batteries from deeply discharged state increasing performance and battery life.

11.

Restart mode          *This mode allows the charger to effectively be left connected to your batteries; it works at a safe level and ready for use.           *The program engages a special charging waveform and monitors the battery voltage variety, if the battery voltage sinks, the special pulses will keep the battery in optimal state, if the battery voltage drops even lower, the battery charger will switch into bulk charging.

The maintenance mode allows the charger to be connected to the battery over the course of a season.
  Package Included: 1 XBattery Charger

You may also like...